Nano wall paint application method:
1.Clean wall surface if any powdery, foreign objects, oil dirty problem, etc. Especially, if surface has powdery problem, must coat primer coating to make wall surface be solid.
2.Level one layer of putty on surface (in case of common putty, need add white glue 10% with higher strength). Ps. If having old painting, not necessary to level one layer of putty.
3.Coat P798 primer coating twice, total coating thickness: 0.18kg/m2. First time & 2nd time coating is between 30 minutes.
4.On next day, coat P799 (top coating) only one time, thickness: 0.035kg/m2.
Remark:
a) please mix well before coating. If P798 (primer coating) becomes too stiff, can add clean water 5~10%. IMPORTANT: P799(top coating) can NOT add any water. When you mix P799A + P799B, please stir P799A first & then mix with P799B. After P799A+P799B is mixed well, it will become hard after 45 minutes. Hence, just mix your needed volume each time.
b) Paint tool: spray gun, brush (if you use pray gun to coat P799, during break time, you can use alcohol to wash gun nozzle to avoid P799 become hard as obstruction)
c) Please coat wall paint as light thickness as above-mentioned. Do not coat heavier thickness.
|